CTE-GM Leak test box
The big box
With a total visibilityand thanks to his plexiglass design, it is very quick and easy to see if there is a leak on the packaging.
It is most often used in edge industries of production line for its simplicity and fully pneumatic operation and for his big capacty to control big series. It is very useful in case of quality crisis or during an audit to control a whole lot.
Most often used for vials or bottles, it is also used to remove air bubbles and impurities in the enamel, emulsion, or those present before braizing or welding.
Description
Benefits
- Fully pneumatic
- Quick and simple test for large series
- Available trolley for a better mobility
- Layout with shelf for a large serie of samples
Options
| Air drain valve for easy return to PA. |
| Support trolley for a better mobility |
| Adjustable time device from 0 to 99 999 seconds |
| Needle vacuum gauge with a better resolution |
Included
A calibration certificate LNE/COFRAC
Informations complémentaires
| Caisson | Transparent PMMA box with front door opening |
|---|---|
| Etendue de mesure et précision | From -0.1 to -0.85 Bar as standard. |
| Dimensions utiles | Length (L) 500 mm x Depth (D) 450 mm x Height (H) 500 mm |
| Lecture de la dépression | Needle pressure gauge 50 mbar resolution |
| Unités | Bar, Psi |
| Alimentation | – On compressed air network from 6 to 8 bars connected to Rislan® 8mm pipe (not included) |
| Poids | Weight: 60 kg |
| Epaisseur | 30 mm depending on the RDM study |
| Réglage dépression | Regulator with filter |
| Durée de dépression | Adjustable time device from 0 to 999 s |
| Principe du test | Visual |
| Température | From 0 to 40 °C |
| Normes | ASTM D4991, ASTM D5094, ASTM D4169, EN 14401, DIN55528 (Part 1, 2, 3, 4 , 5) |